--- title: "Emergency and Work Lighting Installation" source: https://fleetrepairshops.com/services/liftgate-upfit/emergency-lighting business: OCRV Fleet Repair Shop location: Yorba Linda, CA serves: Irvine, California phone: (714) 909-1844 --- # Emergency and Work Lighting Installation Emergency and work lighting installation fits light bars, beacons, strobes, scene lighting, and directional arrows to service, utility, and municipal vehicles, with wiring, switching, and circuit protection sized for continuous duty. Range: $400 to $3,500 Collision estimates for insurance claim walk-ins carry no charge. Systems estimates are $150 and diagnostics are $285 per hour, both credited against an authorized repair. ## Wiring done properly Emergency lighting runs for extended periods with the vehicle stationary. That is a continuous load on the electrical system and it needs cable sized for the run, dedicated circuit protection, and a switching arrangement the operator can use without looking. Poorly installed lighting is the most common cause of parasitic drain complaints on service vehicles, and it is entirely avoidable. - Light bar, beacon and strobe mounting - Scene and work area lighting - Directional arrow and traffic advisor installation - Dedicated circuits with correct protection - Switch panel installation and labelling - Battery drain assessment for stationary operation ## Questions **Will emergency lighting drain the battery?** It can, on a vehicle that idles rarely and runs lights for long periods. We assess the duty cycle and can fit an auxiliary battery if the load justifies it. **Can you install a full municipal package?** Yes, including light bar, rear directional, scene lighting, and switching. **Do you handle the switch panel layout?** Yes, and layout matters. A driver should be able to find the right switch without taking their eyes off the road. --- OCRV Fleet Repair Shop, 23281 E La Palma Ave, Yorba Linda, CA 92887. Phone (714) 909-1844. All work is performed at our Yorba Linda facility.